How to clean up construction dust without making further mess? Many people find themselves wondering the same question after the completion of construction or renovation. Renovations make our homes look and feel so new. However, one problem left after the fun of remodeling is “construction dust”.
If you are from New York you don’t have to worry about post-renovation cleaning. At BRYE A+ Cleaning we have got you covered. We understand that it is important to clean up construction dust to make sure that one’s living environment is safe as well as comfortable. This guide explains the way how to clean construction dust thoroughly in simple 7 steps and the advantages of utilizing professional cleaning services.
Why Is It Important to Clean Construction Dust?
Cleaning construction dust is not just about making things look clean and presentable. It is all about having healthy surroundings for oneself and family members. Generally, construction dust is dangerous to human health because it triggers serious breathing difficulties associated with asthma and allergies. If you do not know how to clean construction dust many issues may arise including blocked air filters and the ducts.
Also, construction dust can scratch surfaces of furniture and the floor since abrasive particles are left behind. Cleaning your home correctly is about more than aesthetics; it is about making everyone safer.
Post-Construction Cleaning Checklist
Before post-construction cleanup, preparation precedes the cleaning process. A proper checklist will give you an assurance that you have all the needs required and cleaning process is efficient.
Materials Needed:
- Microfiber Cloths
- Vacuum Cleaner (HEPA)
- Mop and Bucket
- Duster with Extension
- Plastic Sheets
Personal Protective Equipment (PPE):
- Face Masks
- Gloves
- Safety Goggles
Cleaning Detergents & Products:
- Cleaners for most hard surfaces.
- Hardwood floor-friendly cleaning solutions.
- Mirrors and window glass cleaners.
Step-By-Step Post-Construction Cleaning Process
To answer your question “How to clean up construction dust” here are the seven easy steps, which will include the best way of cleaning dust after the construction are as follows;
Step 1: Ventilate the Area
It takes about two hours for the dust and debris to settle in the space and an air change is needed to provide fresh air for the occupant of the space. Start with opening all the available windows and doors in the house. Such places bring in a cross-draft, which will help in removing any more dust from the place. If you have an air purifier then use it for cleaning the remaining dust particles around the house. Make sure that it has a HEPA filter to be effective when in use.
Step 2: Perform a Rough Cleaning
Pre-cleaning helps to eliminate large particles and clear the space for refined cleaning. Firstly pick up large debris, for instance, waste scraps, residual materials, or packaging materials. Hold a stiff broom to sweep the floor surface to remove dust and dirt which are on the floor. Make sure to sweep corners, baseboards, and along edges with a vacuum cleaner.
Step 3: Dust High Surfaces
Dust commonly falls on higher elevations. A long-handled duster should be used for cleaning ceilings and light fixtures. For more difficult to remove stains use a damp microfiber mop. Apart from using the vacuum cleaner, it is recommended to individually clean every blade on the ceiling fans with a damp cloth or a commercial fan duster. Do not forget that the tops of cabinets, doors, window frames, as well as shelves, need dusting too.
Step 4: Wipe Down Walls and Windows
Walls, windows, and blinds can retain dry fine dust. It should not be overlooked. These places need to be cleaned to achieve a polished look. For walls, if washing is not possible then use a damp microfiber cloth or mop to wipe walls.
In the case of painted walls, wash with a solution that is safe for the paint. Wash all windows with a glass cleaner or preferably, get a microfiber cloth to clean all the windows. Make sure to include the window frame and sills in your cleaning list.
Step 5: Deep Clean Floors
Among all construction sites, it is more typical for floors to be greatly affected by dust. They should be cleaned with attention. When cleaning a hard floor, one should ensure that the vacuum uses a hard floor setting to ensure it clears debris and dust. After vacuuming mop the floors using a cleaning solution depending on the kind of floor you have at home. If the flooring is hardwood, then use a cleaner that is safe for hardwood.
Step 6: Clean All Appliances
Fixtures and appliances have dust accumulating on them even if initially it seems like it has been cleaned. Clean all the appliances like the oven, refrigerators, microwave, etc. Do not neglect the area behind or below these appliances.
Step 7: Clean HVAC Systems
Hazardous construction dust finds its way into HVAC systems and calls for cleaning to improve the air quality. Filters in heating, ventilation, and air conditioning systems must be replaced after construction is completed to be sure that no dust is circulating.
This way there will be little to no dust collected; in case of excessive dust, it is recommended to hire a professional cleaning service. Contact us for all your cleaning needs. A team of professionals is present with us to offer the best cleaning services in New York. Book your free consultation today!
How To Remove Cement Dust From Home After Construction?
Cement dust is fine and can settle into tiny crevices, requiring extra care to remove. Here is how you can remove cement dust from your home after construction:
- Sweep or vacuum the hard floor with a vacuum cleaner setting for dust collection.
- Then use a wet microfiber cloth or mop and wipe the walls, windows, and furniture.
- Dilute equal measures of water and white vinegar to soften deposits of cement on hard surfaces.
- Where cement dust is thick forming a paste, use a soft-bristle brush to remove it.
- Use a sponge to scrub stubborn spots.
- When there is little or no debris, wash the floors or wipe the surfaces with clean water.
Post-Construction Cleaning
Post-construction cleaning involves a lot of cleaning with attention. It will ensure that every spot and crevice gets a clean look. This section is devoted to the explanation of how to clean the construction dust and includes the sections on the floor, walls, ceiling vents, and fixtures.
1- How To Clean up Construction Dust From the Floor? (Hardwood, Tiles, & Carpets)
Floors are usually the part that gathers most of the construction dust. One must make sure they are tidied up extensively to provide a safe and clean surface.
Hardwood Floors
For hardwood start with sweeping using a soft broom to remove any loose dirt on the floor. It should be followed by the microfiber mop, which should be slightly wet to help remove finer particles, but safe for wooden floors. Avoid soaking the surface too much as excessive water may affect the wood through bending or even rotting of the wood. A vacuum cleaner with a soft brush attachment should be used in hard-to-clean areas such as the underneath of furniture or corners.
Tile Floors
For tile floors, you should ensure that the floor is free of dust or dirt. This could be done through either vacuuming or sweeping the floor. Wash the tiles with warm water and a neutral pH cleaner and make some efforts to mop the tiles. Grout lines should be cleaned with hard water and baking soda using a toothbrush to remove hard stains. Wash with running water and allow the surface to dry out.
Carpets
Dirt becomes embedded in carpets which again calls for a multi-step cleaning process. Using suction to remove small debris that can be picked by a HEPA filter. For easily noticeable stains use mild carpet cleaner and scrub the affected area lightly. If construction dust has settled into the fibers, steam cleaning is more effective as it cleans right down to the base.
2- How To Clean up Construction Dust From Walls & Ceilings
Below we have discussed briefly how to clean up construction dust from walls and ceilings
Walls
For dusting walls, use a yarn wall duster or microfiber dust mop, or even a duster with an extended handle that you use from the top down. If the walls are painted wipe the solution on the cloth and make sure it is damp not wet before wiping it on the walls. Focus on corners, trims, and molding.
Ceilings
Dust the vacuum ceilings by holding the brush attachment and making sure not to spread the dust particles. Use a dry sponge to avoid gouging the ceilings that have a textured or popcorn look. The light fixtures and ceiling fan should be cleaned.
Advanced Post-Construction Cleaning Techniques
In learning how to clean construction dust, one must learn special techniques that are more professional than ordinary methods to achieve a clean space. These techniques provide a better cleaning to ensure that your post-construction environment is safe, comfortable, and free from dust. Here are some key techniques:
- HEPA Vacuuming
Your vacuums should be equipped with HEPA filters to effectively trap ultra-fine dust particles from the air. Pay more attention to the floor, carpets, and corner areas.
- Wet-Dusting
Soak the microfiber clothes slightly, to wipe the surface without using soap and water and leaving streaks. This is suitable for shelves, countertops, and any sensitive surfaces you wish to clean without causing any harm.
- Steam Cleaning
Use steam cleaners to clean the floor, tiles, and carpets. Steam cleaning not only helps in clearing dust but also helpful in killing germs naturally.
- Electrostatic Cloths
Use electrostatic dust cloths when cleaning parts that might be tough to reach or are delicate including electronics, and light fixtures.
- Air Purifiers
Use good quality air purifier systems to filter circulating air which can include dust and other allergens.
- Specialized Cleaning Agents
Use solvents and tools to clean hard areas that require special focus such as cement dust, glue, or paint splashes.
- High-Pressure Air Cleaning
Use high-pressure air cleaning to blow dust from different vents, cracks, and any other complicated areas.
Get Professional Cleaning Services By BRYE A+ Cleaning
Although household cleaners can be bought and used for cleaning, professional cleaning does the work best in a better way. High-powered equipment and advanced methods are used to make sure every part of your property is as clean as new. At BRYE A+ Cleaning, our team specializes in advanced post-construction cleaning techniques that not only provide you with a clean space but also peace of mind. Some of the benefits include:
- Faster cleaning process
- Reduced risk of missed spots
- Effective deep-cleaning machines
Don’t let the stress of cleaning worry you. Contact us today to experience the best cleaning services in New York. Let our professionals handle all the mess. Call us now and schedule your appointment!
Conclusion
This guide explores a step-by-step approach to how to clean up construction dust. First, prepare the checklist which is discussed above. Next, follow the simple 7 steps to get rid of construction dust. In this blog advanced techniques for post-construction cleanup are also discussed. However, for deep cleaning purposes hiring a professional such as BRYE A+ Cleaning is recommended.
Frequently Asked Questions About Construction Dust
What is the best way to clean construction dust?
The best way to clean construction dust is to use a broom or vacuum to clear bigger particles. Next wash walls, doors, and all surfaces from top to bottom. At the end use a wet mop.
How do you treat construction dust?
To treat construction dust use damp cleaning such as wiping with microfiber. Finer dust particles can be removed by using a HEPA filter vacuum and air purifier.
How long does construction dust stay in the air?
Construction dust can be present for up to 48 hours within the area depending on air ventilation. Open the windows and use a fan or air purifier to fasten the procedure.
How do I get rid of the builder’s dust in my house?
To get rid of builder’s dust take down blinds or curtains to air the space for ten minutes using both the windows and doors to eliminate airborne dust. Wipe and dust every surface properly.
How do you clean dust fast?
To clean dust fast open the windows and use fans when you are cleaning to create some form of cross-ventilation. To help avoid moving dust from one place to another, you should use damp microfiber cloths and mops.
